×


INTRODUCTION:

We are well equipped with sophisticated modern instruments and equipment’s which are operated by highly qualified and trained professionals. We cover a wide range testing which includes lubricants, fuels industrial chemical and etc. All tests in our Laboratory are performed according to ASTM, ISO, IEC, IP and internal standards.
We adopted following I.S.O. Systems:
• AIAO BAR 17025
• Quality Management system (Q.M.S) ISO 9001

Get your machinery lubrication oil analyzed to significantly increase performance and reliability

• Comprehensive machinery lubrication oil analysis.
• Corporate technical support to offer expert advice and troubleshooting.
• ICML certified lubrication consultant to visit on a regular basis.
• Complete reliable range of Oil testing equipment's.
• Training and certification of Machinery Lubrication Analyst from ICML USA.
• Complete Testing of I nsolati ng Oil (Transformer Oil) and other Oils Testing.

Lubricant condition analysis

ClierniLal and physical property changes including lubricant degradation and additive depletion.
• Lubricating Oils
• Turbine Oils
• Transformer Oil

Contamination Analysis

Quantitative and qualitative analysi of substance for system.

Machine Condition Wear Debris Analysis.

Determining the condition of machin¬ery through the examination of the particles generated by wear process.

LUBRICATION AUDIT SCOPE

Lubrication audit verify unreliable equipment that may be due to poor lubrication program. Audit will compare current lubrication practices against "best practices"and document the results and recommendations to assist. All practices from storage, through dispensing and handling to actual machine application, Looking at contamination control practices, Staff awareness and attitudes to lubrication, Oil analysis practices such as sampling, testing and action on feedback. Maintenance expenditure on lubrication,Any immediate and longer-term opportunities for improvement.

Fuel Analysis:

We diverse fuels e.g. furnace oil, petrol, diesel, for full quality specifications following regulatory standards such as ASTM, ISO, and IP standards. Inhouse expertise and analytical resources make us an ideal fuel testing provider for trouble-shooting and trace contamination issues.

Sr. No.Test Name
1.Specific gravity
2.Kinematic viscosity @ 50˚C
3Flash point
4Pour Point
5Sulphur Content
6.Ash content
7.Base sediments by extraction
8.Water %
9.Strong Acid Number mg KOH/g
10.Calorific Value
11.Carbon Residue Conrad son
12.Vanadium
13.Sodium
14.Potassium
15.Silicon
16.Zinc
17.Phosphorus
18.Sulphur Content
Sr. No.Test Name
1.Color (ASTM)
2.Specific gravity
3API Gravity @ 60/60˚F
4Distillation range
50% Vol recovery
90% Vol recovery
5Viscosity cSt @ 40˚C
6.Base Sediments by Extraction
7.Water %
8.Neutralization value:
Total Acid Number mg KOH/g
Strong Acid Number mg KOH/g
9.Copper Corrosion
10.Flash Point ˚C (PMCC)
11.Ash content
12.Cloud Point
13.Pour point
14.Sulfur content
15.Cetane index
16.Conrad son carbon residue

Lubricating Oils:

Reduction in operating cost and power loses could be achieved by effective condition monitoring of lubricating oils.

Our Condition monitoring oil analysis report would help our valuable customers to minimize cost, down time and repairs by pointing out the developing problems before they become critical. Our oil analysis condition monitoring report would also help its customers to determine suitability of the lubricant for continued use.

Sr. No.Test NameStandard
1.Viscosity cSt @ 40˚CASTMD445
2.Viscosity cSt @ 100˚CASTMD445
3Viscosity IndexASTMD2270
4Flash Point ˚C (COC)ASTMD93,D92
5Total Acid No. mg KOH/gASTMD664
6.Total Base No. mg KOH/g ASTMD2896
7.Condition Monitoring of Oil FTIR
• Soot
• Oxidation
• Nitration
• Sulphates
• Anti-wear
• Gasoline
• Diesel
FTIR
8.Wear Metal Analysis
• Aluminum
• Calcium
• Chlorine
• Cobalt
• Chromium
• Copper
• Iron
• Magnesium
• Manganese
• Molybdenum
• Nickel
• Phosphorus
• Tin
• Sulphur
• Titanium
• Vanadium
• Zinc
ASTMD6595

Turbine Oil:

Turbine oil condition monitoring program has ability to routinely monitor its customer’s samples for the detection of degradation in physical and chemical properties of in-service turbine oils.

Sr. No.Test NameStandard
1.Total Acid No. mg KOH/gASTMD664
2.Viscosity @ 40˚CASTMD445
3Appearance-
4ColorASTMD1500
5Water Content ppmASTMD6304
6.Determination of aminic and phenolic anti-oxidants/Ruler testASTMD6971
7.Condition Monitoring of Oil FTIR
• Soot
• Oxidation
• Nitration
• Sulphates
• Anti-wear
• Gasoline
• Diesel
FTIR
8.Wear Metal Analysis
• Aluminum
• Calcium
• Chlorine
• Cobalt
• Chromium
• Copper
• Iron
• Magnesium
• Manganese
• Molybdenum
• Nickel
• Phosphorus
• Tin
• Sulphur
• Titanium
• Vanadium
• Zinc
ASTMD6595

Transformer Oil:

Transformers has life of ten years and even more if the continuous condition monitoring program is being followed. Transformer condition monitoring oil analysis program allow its customers to predict any unwelcome faults transformers.

It is not possible to dismantle transformers for routine checks so transformer oil analysis is carried out which helps to maintain life of transformers. Transformer condition monitoring oil analysis program includes furan analysis, PCBs, acid number and many more…

Sr. No.Test Name
1.Total Acid No. mg KOH/g
2.Di Electric Strength KV
3Tangent Delta at 90˚, 1 KV, 50Hz
4Resistivity @ 90˚C, +RHO, m
5Resistivity @ 90˚C, -RHO, m
6.Water Content ppm
7.Furfural Content ppm
• Soot
• Oxidation
• Nitration
• Sulphates
• Anti-wear
• Gasoline
• Diesel
8.PCA%
9.PCB ppb
10.IFT


×

Recognition / Authorization

Recognition /Authorization as INSPECTION AUTHORITY (3rd PARTY) - "CLASS-1"